Epson Mobilink TM-P60 Technical Reference Manual Download Page 21

Page: 21 / 148

Rev. B

General Information

1-1

TM-P60 with Peeler Technical Reference Guide

Chapter 1

General Information

1.1 Features

The TM-P60 with Peeler is a mobile label printer designed to meet the needs of retail, grocery
stores, DIYs, and speciality chain stores for in-store printing of items such as shelf labels,
discount labels, and product tags.

1.1.1 General

❏

Compact size with rugged design to ensure top reliablility.

❏

Support for 802.11b wireless LAN protocols.

❏

Belt clip for maximum mobility.

❏

The peeler function is installed as the standard. (It is easy to switch between the peeler mode
and the label continuous issuing mode.)

❏

Industry-leading 12-hour battery life. (When power management is enabled.)

1.1.2 Printer handling

❏

Drop-in paper loading for easy use.

1.1.3 Printing

❏

Clear, crisp high speed thermal receipt printing.

1.1.4 Software

❏

Command protocol is based on the ESC/POS proprietary command system.

❏

OPOS ADK and Windows printer driver are available.

❏

Automatic status back (ASB) function that automatically transmits changes in printer status.

Summary of Contents for Mobilink TM-P60





















































































































































Search results

Summary of Contents for Mobilink TM-P60

Reviews:

Related manuals for Mobilink TM-P60

Brands by name

Popular brands

Epson Mobilink TM-P60, Technical Reference Manual

Search results

Summary of Contents for Mobilink TM-P60

Reviews:

Related manuals for Mobilink TM-P60

Brands by name

Popular brands