Epson Mobilink TM-P60 Technical Reference Manual Download Page 94

Page: 94 / 148

A-22

Wireless LAN Setup Detailed Information

Rev. B

❏

Path Information

Information about Network Card is displayed.

❏

Wireless Information

Information about Wireless communication is displayed.

•

Refresh button

The Wireless Information is updated with the latest
information.

Item

Explanation

Search Path

The protocol used by the Search and the protocol detected by the
Search is displayed.

Item

Explanation

Communication
Standard

The IEEE communication standard type of the wireless LAN is displayed.

Communication
Mode

Communication Mode (Network Mode) (Infrastructure or Ad Hoc) is
displayed.

SSID

The wireless Service set of the print server is displayed.

Channel

The channel of the wireless LAN is displayed.

Transmission Rate

The transmission rate of the wireless LAN is displayed.

Signal Condition

The signal condition of the printer is displayed an the icon.

Excellent

Good

Poor

No Connection: There is possibility that it cannot communicate.

Unknown :Confirm the setting once again.

Summary of Contents for Mobilink TM-P60





















































































































































Search results

Summary of Contents for Mobilink TM-P60

Reviews:

Related manuals for Mobilink TM-P60

Brands by name

Popular brands

Epson Mobilink TM-P60, Technical Reference Manual

Search results

Summary of Contents for Mobilink TM-P60

Reviews:

Related manuals for Mobilink TM-P60

Brands by name

Popular brands