Epson Mobilink TM-P60, Technical Reference Manual

Page: 140 / 148

E-4 FAQ Rev. B
Q 8. Searching on the network takes several minutes.
A 8.1 The IP address is set redundantly.
When the same IP address is set for more than one device connected to the network, searching
takes time and communication may be impossible. Confirm the settings for the devices.
Q 9. Network is disconnected several minutes after it is connected.
A 9.1 The power management or suspend function of the PC on the network is
operating.
Confirm that the power management and suspend functions are turned off.
Q 10. TM-P60 with Peeler turns off several minutes after it is turned on.
A 10.1 The period of time set for the auto power off of TM-P60 with Peeler is not proper.
When the TM-P60 with Peeler is set “time for auto power off” by memory switch, the TM-P60
with Peeler turns itself off automaticaly when it doesn’t receive any data in the specified period.
Confirm the power management function of theTM-P60 with Peeler. (See “Memory Switches”
(page 2-11))
Q 11. Printing is not possible.
A 11.1 The TM-P60 with Peeler is turned off.
Turn on the TM-P60 with Peeler.
A 11.2 The power is turned off during printing.
There is no remaining battery. Replace it or recharge it or connect the AC adapter.