Epson Mobilink TM-P60 Technical Reference Manual Download Page 108

Page: 108 / 148

A-36

Wireless LAN Setup Detailed Information

Rev. B

TCP/IP

Click the TCP/IP, the screen below is displayed. Set the TCP/IP.

❏

TCP/IP Setting

•

SUBMIT button

Click this button after changing the setting contents to
send the setting contents to the TM-P60 with Peeler.

Note:

The “Set Using PING“ is changed to “disabled“ automaticaly after the IP address is defined by it.

Item

Explanation

Get IP Address

Select either Auto /Manual.

Set using Automatic
Private IP Addressing
(APIPA)

Select the ON/OFF of the APIPA (Automatic Private IP Addressing)
function.

Set Using PING

Select the ON/OFF of the IP address setting by PING.

IP Address

Set the IP Address.

Subnet Mask

Set the Subnet Mask.

Default Gateway

Set the Default Gateway.

Summary of Contents for Mobilink TM-P60





















































































































































Search results

Summary of Contents for Mobilink TM-P60

Reviews:

Related manuals for Mobilink TM-P60

Brands by name

Popular brands

Epson Mobilink TM-P60, Technical Reference Manual

Search results

Summary of Contents for Mobilink TM-P60

Reviews:

Related manuals for Mobilink TM-P60

Brands by name

Popular brands