Epson IR-320, Technical Reference Manual

Page: 280 / 340

5-20 BIOS Functions Rev.C
3) FDD, Error Halt
The items related to the FDD and error that halt at boot-up are as follows.
Notes: When the
Drive A
is
None
setting, the system resources, such as the IRQ, cannot be released.
Item Options Notice
Landing Zone ----- This item indicates the head fixed track number for the connection
device. The following differences will occur, depending on the device
detection method used.
Auto:
The value obtained by the device is displayed.
Manual: The user can set the value within a range of 0-65,535 only when
the access method is set as “CHS”. (When connecting a
device for which there is no particular value specified, the
number “1” is specified as the maximum number of cylinders).
Sector ----- This item indicates the number of sectors for the connection device.
The following differences will occur, depending on the device
detection method used.
Auto:
The value obtained by the device is displayed.
Manual: The user can set the value within a range of 0-255 only when
the access method is set as “CHS”.
Item Options Fail-Safe Default Optimized Default
Drive A None
360K , 5.25 in.
1.2M , 5.25 in.
720K , 3.5 in.
1.44M, 3.5 in.
2.88M, 3.5 in. None 1.44M, 3.5 in.
Halt On All Errors
No Errors
All,But Keyboard
All,But Diskette
All,But Disk/Key All Errors All Errors