Epson IR-320, Technical Reference Manual

Page: 137 / 340

Rev. C OS and Drivers 3-25
IR-320 Series Technical Reference Manual
3. Enter the following from the command prompt. (x: Drive with the image file) After that,
the OS recovery starts.
A:\>
x:
[Enter]
start
[Enter]
4. The following message appears. Select and enter the partition size of the HDD.
Please select the system partition size.
1: 10GB (Default size)
F: Full size of HD.
Please push a key of 1 or F._
5. Select the range to format as the system area on the hard disk. Press the “1” key to select
10GB or press the “F” key to select the full size. After that, the OS recovery starts.
6. Following the title “EasyRestore,” the EPSON Logo Startup screen is displayed. Select
Continue .
7. After the OS is recovered, set up the OS.
8. Return the printer driver for OPOS and Windows saved in “Preparing a Recovery
Medium.”
Restrictions
❏
The size of the image data to be saved amounts to 500–600 MB. Saving this much data
requires a large-capacity device, such as a CD-R, MO, or server.
❏
Because of restrictions of EasyRestore, the HD image data file (HDIMG003.PQI) cannot be
divided.
❏
Because EasyRestore runs only on MS-DOS, it is a requirement of “Saving of HD Image
Data” that MS-DOS can recognize the saving destination device.
❏
When startup is initiated from the built-in hard disk of the IR-320, recovery is impossible.