Epson IR-320 Technical Reference Manual Download Page 163

Page: 163 / 340

Rev. C

OS and Drivers 3-51

IR-320 Series Technical Reference Manual

Installing the Sound Driver

This is installed by the exclusive installation program.

1. Insert the Driver CD-ROM for the IR-320 in the CD-ROM drive. Start

Win98\Sound\SETUP.EXE.

2. The Setup Wizard starts and the Welcome dialog box is displayed. Click

Next

3. The reboot dialog box is displayed. Confirm that the [Yes, I want to restart my computer

now] is selected, and click

Finish

to reboot the system.

4. The Sound Driver is installed after the system is rebooted.

Uninstalling the sound driver

1. Select [Start Menu] - [Settings] and open the control panel.

2. Select [Add/Remove Programs] in the control panel.

3. Select [SoundMAX].

4. Click

Add/Remove

5. The Setup Type dialog box is displayed. Select [Remove all] and click

Next

6. The reboot dialog box is displayed. Confirm that [Yes, I want to restart my computer now] is

selected, and click

Finish

Installing the Touch Panel Driver

This is installed by the exclusive installation program.

1. Insert the Driver CD-ROM for the IR-320 in the CD-ROM drive. Start

Win98\Touch\EPSTP9x.EXE.

2. The Setup Wizard starts and the Welcome dialog box is displayed. Click

Next

3. The Choose Destination Location dialog box is displayed. Input the folder and click

Next

The default setting is C:\Program Files\EPSON\TouchPanel.

4. The Setup Complete dialog box is displayed. Confirm that [Yes, I want to restart my

computer now] is selected, and click

Finish

to reboot the system.

Uninstalling the touch panel driver

1. Select [Start Menu] - [Settings] and open the control panel.

2. Select [Add/Remove Programs] in the control panel.

3. Select [EPSON Touch Panel Driver].

4. Click

Add/Remove

Summary of Contents for IR-320





















































































































































































































































































































































Search results

Summary of Contents for IR-320

Reviews:

Related manuals for IR-320

Brands by name

Popular brands

Epson IR-320, Technical Reference Manual

Search results

Summary of Contents for IR-320

Reviews:

Related manuals for IR-320

Brands by name

Popular brands