Epson IR-320 Technical Reference Manual Download Page 156

Page: 156 / 340

3-44

OS and Drivers

Rev. C

5. Installing is completed and the InstallShield Wizard Complete dialog box is displayed.

Confirm that the [Yes, I want to restart my computer now] is selected, and click

Finish

reboot the system.

Uninstalling the video driver

Uninstalling cannot be done.

Installing the Sound Driver

This is installed by the exclusive installation program.

1. Insert the Driver CD-ROM for the IR-320 in the CD-ROM drive. Start

Winnt\Sound\SETUP.EXE.

2. The Setup Wizard starts and the Welcome dialog box is displayed. Click

Next

3. The About SoundMAX Integrated Digital Audio dialog box is displayed. Click

4. The Setup Complete dialog box is displayed. Confirm that [Yes, I want to restart my

computer now] is selected, and click

Finish

to reboot the system.

Uninstalling the sound driver

1. Select [Start Menu] - [Settings] and open the control panel.

2. Select [Add/Remove Programs] in the control panel.

3. Select [SoundMAX NT].

4. Click

Add/Remove

5. The Confirm File Deletion dialog box is displayed. Click

Yes

6. Uninstalling is completed and the dialog box is displayed. Click

7. The reboot dialog box is displayed. Click

8. Reboot the system.

Installing the Touch Panel Driver

This is installed by the exclusive installation program.

1. Insert the Driver CD-ROM for the IR-320 in the CD-ROM drive. Start

Winnt\Touch\EPSTPNT.EXE.

2. The Setup Wizard starts and the Welcome dialog box is displayed. Click

Next

3. The Choose Destination Location dialog box is displayed. Input the folder and click

Next

The default setting is C:\Program Files\EPSON\TouchPanel.

4. The Setup Complete dialog box is displayed. Confirm that [Yes, I want to restart my

computer now] is selected, and click

Finish

to reboot the system.

Summary of Contents for IR-320





















































































































































































































































































































































Search results

Summary of Contents for IR-320

Reviews:

Related manuals for IR-320

Brands by name

Popular brands

Epson IR-320, Technical Reference Manual

Search results

Summary of Contents for IR-320

Reviews:

Related manuals for IR-320

Brands by name

Popular brands