Epson IR-320, Technical Reference Manual

Page: 199 / 340

Rev. C Utilities 4-19
IR-320 Technical Reference Manual
Print
Displays the Print dialog box.
Key Definitions
Each key on the screen corresponds with the actual key-top of the keyboard unit. For defining
the key top, use the following procedure:
1. Click the key you want to set to use this code, and it becomes selected. (Clicking it again
cancels the selection.)
2. Click
Code
, and open the KeyCode dialog box.
3. Input the code for the selected key from the keyboard. This code can be up to a maximum of
63 bytes.
When you select a key, if you hold down Shift and click the key immediately to the right of
or immediately below the selected key, the two keys are connected. By repeating this
procedure, a number of keys can be connected to create one large key. If you press
Shift
while the connected key is selected, the connection is canceled.
4. If you click OK , the setting becomes valid, and the key dialog box is closed. If you click
Cancel , the setting is canceled. If you click Reset , the code is cleared.
Setting the Key Label
Use the following steps to set the key label displayed on the key position button.
1. Click the key you want to label, and it becomes selected.
2. If Label is clicked, the KeyLabel dialog box is opened.
3. Input any characters as the label.