Epson GQ-3500, User Manual

Page: 56 / 165

8. Attach the seal take-up lever to the small plastic shaft at the
front of the toner cartridge. (See Figure 5-7.) Move the lever back
and forth (in the direction of the arrows as shown in Figure 5-7)
until it won’t move any farther with moderate pressure. (You will
see red markings on the seal when you reach the end of it.> This
step peels back the toner seal and releases the toner into the
developing unit.
Figure 5-7. The
take-up lever
-
9. Tap lightly on the comers of the toner cartridge to prevent the
toner from remaining in the comers of the cartridge.
Caution
Once the toner cartridge has been installed, do not remove it until you
are prompted to do
so
by the
TONER OUT
light on the control panel.
Otherwise toner will spill into the printer.
10. Remove the take-up lever.
11. To make sure that the developer unit is properly locked into place,
press on the two blue stickers located to the right of the toner
cartridge.
12. Now that you have installed the internal components, close the
printer and gently press down on the top of the case until the latch
clicks shut.
5-10
Maintenance and Status Messages