ESC m
Format:
code:
ESC m
n
Decimal:
27
109 n
Hexadecimal:
6D n
Set Number of Copies
Comments:
Specifies the number of copies to print of each page. The value of
must be from 1 - 99. If
this command is ignored. If is greater than
one,
the
number of copies
to be
printed is displayed
by the STATUS
indicator.
ESC a
Specify Minimum Increment
Format:
code:
ESC q
nl
n2
27
113 nl
n2
Hexadecimal:
71
nl
n2
Comments:
Specifies the minimum increment which is used when specifying
parameters in other
ds. The value of nl determines the unit of
measure to be used; the value of
specifies the number of units that
will make up the minimum increment.
The following values can be used for nl :
Minimum increment is specified in dots
of an inch).
1: Minimum increment is specified in
of an inch.
2: Minimum increment is specified in characters (character pitch
horizontally and line spacing vertically).
The following values can be used for
When
(dots), the smallest possible minimum increment is
inch
must be from 1 - 255.
When
of an inch), the smallest minimum increment is
inch;
must be from 3 - 255.
When
(characters), the minimum increment is based on the current
character pitch (if proportional mode is selected, it is based on pica
pitch) and line spacing;
must be 1.
The power on default minimum increment is
of an inch.
Page Printer Commands
A - 7
Summary of Contents for GQ-3500
Page 2: ...EPSON G Q 3 5 0 0 User s Manual ...
Page 36: ......
Page 160: ...EPSON G Q 3 5 0 0 Quick Reference ...
