Epson GQ-3500, User Manual

Page: 93 / 165

ESC. Move Coordinates
Format:
ASCII code: ESC nl n2 n4
Decimal: 27 nl n2 n3 n4
Hexadecimal:
1 B 2E nl n2 n3 n4
Comments:
Specifies the horizontal and vertical distance of the logical coordinate
system’s origin from
the physical coordinate system’s origin. The
physical origin is always in the upper left comer of the page. This
command lets you move the logical origin (referred to by all the page
layout commands) anywhere on the page. Some of your printing may
run off the paper if you move the logical coordinates too far down or to
the right.
The values of n1 and n2 specify the distance between the physical and
logical origins in the X (horizontal) direction; n3 and n4 specify the
distance between the origins in the Y (vertical) direction. In each case,
the distance is specified in units of the minimum increment, using the
formula: total distance = n1 +
x 256). The minimum increment is
specified q.
Overall Printing Style
Font selection
Format:
ASCII code:
ESC k n
27 107 n
Hexadecimal: 6B n
Select
Comments:
The following values can be used for n:
Roman
5:
OCR-B
1: Sansserif
6:
Modem
2:
Courier Gothic
3:
Prestige 8: EDP
4: Script
The value of n must be between 0 and 255. The values between 9 and 127
are reserved by Epson.
Page Printer Commands
A - 1 7