ESC 0
Format:
code:
Hexadecimal:
ESC 0
27
48
30
Select
Line Spacing
Comments:
Sets the line spacing to
of an inch for subsequent line feed
commands. The
is the character zero (30 hex) and not
code 0.
When a line feed is made after setting the line spacing to
of an
inch, the reference point for positioning is the bottom edge of the
immediately preceding line space.
ESC 2
Format:
ASCII code:
Hexadecimal:
ESC 2
27
50
32
Select
Line Spacing
Comments:
Sets the line spacing to
of an inch for subsequent line feed commands.
The
is the character two (32 hex) and not ASCII code 2. This is the
default at power on.
When a line feed is made after setting the line spacing to
of an
inch, the reference point for positioning is the bottom edge of the
immediately preceding line space.
ESC A
Select
Line Spacing
Format:
code:
ESC A
n
Decimal:
27
65
n
Hexadecimal:
41
n
Comments:
Sets the line spacing to
of an inch for subsequent line feed
commands. The value of must be from 0 - 127.
When a line feed is made after setting the line spacing
this
command, the reference point for positioning is the bottom edge of the
immediately preceding line space.
This command changes the character baseline as well as the line
spacing. The baseline is set at the point that is
of the distance
from the top edge of the line space to the bottom edge.
If the line spacing is changed in the middle of a line the characters on
that line may not align properly.
-
A-10
Page Printer Commands
Summary of Contents for GQ-3500
Page 2: ...EPSON G Q 3 5 0 0 User s Manual ...
Page 36: ......
Page 160: ...EPSON G Q 3 5 0 0 Quick Reference ...
