For EPSON FilmScan 200
(SCSI model) users:
The SCSI driver is not
installed properly.
Install the driver properly. See the
SCSI board user’s guide. Then check
the board’s operation using the utility
software that came with the board.
For EPSON FilmScan 200
(SCSI model) users:
The scanner’s SCSI ID
conflicts with the ID for
another device.
Change the SCSI ID number to an
unused number as described in “SCSI
connections” on page 2-5. Use your
SCSI board’s utility software to check
the ID numbers of other connected
SCSI devices.
For EPSON FilmScan 200
(SCSI model) users:
The SCSI chain is not
correctly terminated.
Check the connection sequence and set
the termination as described in "SCSI
connections" on page 2-5.
EPSON TWAIN does not start.
Cause
What to do
The interface cable is not
connected properly.
Turn off the scanner and your
computer, then make sure the
interface cable is securely connected
between the scanner and computer.
See Chapter 2, “Connecting EPSON
FilmScan 200 to Your Computer.”
The wrong interface cable is
connected.
Use a cable that meets the
requirements for the interface
connection. See the interface board
user’s guide.
The scanner is off.
Turn on the scanner, then start EPSON
TWAIN.
Note:
If your scanner is connected by a SCSI
cable, be sure to turn on the scanner before
you turn on your computer.
7
Tr
ou
b
les
h
o
ot
in
g
R
Onion Ref. Guide
Rev.c
A5 size
Chapter 7
02-07-97
DR, pass 1
Troubleshooting
7-11
Summary of Contents for FILMSCAN 200
