3. Make sure that the scanner is securely plugged into the power
source.
4. Turn on the scanner. After a few moments the READY light
comes on.
If the READY and ERROR lights are flashing, there is a
problem with the scanner. See page 7-3
5. Insert the 35 mm strip film carrier into the scanner. The
scanner slides the carrier backward and forward, and the
READY light goes off.
Note:
You do not have to load film in the film carrier.
6. When the READY light comes on, the scanner test is finished.
If the READY and ERROR lights are flashing, there is a
problem with the scanner. See page 7-3.
If the scanner operates correctly, the problem lies elsewhere;
such as the computer or interface cable.
7. Turn off the scanner and pull out the carrier from the front of
the scanner by hand.
11-an
L
Onion Ref. Guide
Rev.c
A5 size
Chapter 7
02-07-97
DR, pass 1
7-4
Troubleshooting
Summary of Contents for FILMSCAN 200
