Winding film in the film cartridge holder
If you can see film in the window of the cartridge holder, then
the film cartridge is unwound. Before you take the film
cartridge out of the holder, follow the steps below to wind the
film.
c
Caution:
Do not open the cartridge holder cover if film is unwound;
otherwise you may scratch or tear the film.
1. Make sure that the scanner is turned on and the READY light
is on.
2. Reload the film cartridge holder into the scanner. The scanner
automatically rewinds the film (you will hear the sound of
the rewinding), and the READY light comes on.
3. Pull out the cartridge holder from the front of the scanner by
hand.
If you are unable to rewind the film in the cartridge holder,
contact your dealer or a photo development lab.
29-new
L
Onion Ref. Guide
Rev.c
A5 size
Chapter 7
02-07-97
DR, pass 1
7-20
Troubleshooting
Summary of Contents for FILMSCAN 200
