Power supply
The lights come on briefly, but then go off and stay off.
Cause
What to do
The scanner’s voltage rating
may not match the voltage of
your electrical outlet.
Check the scanner’s voltage rating
and the outlets voltage rating. If the
voltages do not match, unplug the
scanner immediately and contact your
dealer.
w
Warning:
Do not reconnect the power cord to an
electrical outlet that does not have
matching voltage.
The scanner does not work and the lights are off.
Cause
What to do
The power cord is not
properly plugged into the
electrical outlet.
Turn off the scanner, make sure the
power cord is firmly plugged into
the electrical outlet, and turn on the
scanner. If the lights still don’t come
on, contact your dealer.
The scanner is turned off.
Press the
OPERATE
button to turn on
the scanner. The OPERATE light will
come on.
The electrical outlet is
controlled by an outside
switch or automatic timer.
Use a different outlet.
The outlet is out of order.
Plug another electrical device into the
outlet to determine whether the outlet
is working. If it is not, use a different
outlet.
L
Onion Ref. Guide
Rev.c
A5 size
Chapter 7
02-07-97
DR, pass 1
7-6
Troubleshooting
Summary of Contents for FILMSCAN 200
