Scanning Quality
Determines the quality of your scan. The factory setting is
Fine. If you change the setting while an image is shown in the
preview window, the preview disappears. In this case, you
need to click
Preview
to replace the image at the new quality
level.
Normal
Scanning quality may be lower than that with the Fine setting,
but scanning speed will almost always be faster. The Normal
setting produces acceptable results when you are working with
good-quality film images.
Fine
In most cases you should use the Fine setting. Always use the
Fine setting when scanning from film images that are under- or
overexposed, out of exposure, or of otherwise poor quality.
Pos. Film Destination Calibration (Macintosh only)
This setting appears only on Macintosh systems machines, and
only if you are working with 35 mm positive film. It selects the
color correction applied to preview images and final images
obtained from 35 mm positives. (This setting has no effect on
scans from cartridge film or 35 mm negative film.) Two options
are available, as follows. The factory default setting is
EPSON
Calibration
.
EPSON Calibration
Uses the EPSON proprietary calibration software. EPSON
Calibration is a custom-designed profile that works with your
scanner.
L
Onion Ref. Guide
Rev.c
A5 size
Chapter 6
02-07-97
DR, pass 0
6-14
Getting to Know More About EPSON TWAIN
Summary of Contents for FILMSCAN 200
