3. Make sure that the film wind indicator is white.
The cartridge holder automatically checks the cartridge’s
winding mechanism when the cartridge is loaded, and the
film wind indicator appears white if the cartridge is usable.
c
Caution:
If you find that the indicator is not white after loading film,
there is a problem with the winding mechanism. Do not
attempt to scan film in this cartridge; otherwise it may cause
damage to the film. Turn the knob on the cartridge holder’s
cover to the OPEN position. Open the cover and remove the
cartridge. Then contact your photo development shop or
processing lab.
4. Turn on the scanner, if you haven’t alreay, by pressing the
OPERATE
button. The READY light comes on after a few
moments.
5. Press and hold the button on the front of the scanner while
pushing the door down until it clicks into place.
Note:
The READY light turns off because the scanner automatically
shuts down when the door is lowered.
film wind indicator
32
L
Onion Ref. Guide
Rev.c
A5 size
Chapter 5
02-07-97
DR, pass 1
5-6
Scanning Images From Your Film Cartridge
Summary of Contents for FILMSCAN 200
