Laser Printer Precautions
This printer uses laser technology. The following list of
precautions applies whenever you open the printer cover.
Even if you are familiar with other types of printers, be sure
to follow these precautions carefully to ensure safe, efficient
operation.
❏
Be careful not to touch the fuser, which is marked CAUTION
HOT SURFACE. If the printer has been in use, the fuser can be
very hot.
❏
Avoid touching the components inside the printer unless
instructed to do so in this guide.
❏
Never force the printer’s components into place. Although the
printer is designed to be sturdy, rough handling can damage it.
❏
Be sure not to scratch the surface of the drum. When you
remove the imaging cartridge from the printer, always set the
unit on a clean, smooth surface. Also, avoid touching the
drum, since oils from your skin can permanently damage its
surface and may affect print quality.
❏
Do not turn the cartridge upside down or stand it on its sides.
CAUTION HOT SURFACE ATENCION EXTERIOR CALIENTE
VORSICHT HEISS ATTENTION SURFACE CHAUDE
int-5n
L
Skylark Rev.c
Reference Guide
A5 size
Introduction
’96/05/15
pass 1
12
Getting Started
Summary of Contents for EPL-N1200
