![background image](http://html.mh-extra.com/html/epson/epl-n1200/epl-n1200_reference-manual_109081057.webp)
RITech
Use this drop-down list to select the RITech (Resolution
Improvement Technology) setting you want to use. The
settings available in this list are:
Dark
,
Medium
(default),
Light
,
Off
. For normal printing, the default is sufficient.
Density
Adjust the print density to make the printout darker or
lighter. The settings available in this list are:
Darkest, Dark
,
Medium
(default),
Light
, and
Lightest
.
Show all font names
When this checkbox is selected, EPSON fonts are added to
your application’s font lists. If you deselect this option, the
printer’s internal fonts will not be displayed in the font list.
BiDi Mode
Use this drop-down list to enable the bidirectional interface
to send printer status back to the PC. Leave the default
value set to “
Bidi OFF
” if your system hangs when you try
to print.
Time-out
Use this drop-down list to specify how long the printer should
wait for data before terminating the current print job. You
can specify a time as short as 5 seconds or as long as 300
seconds.
Toner Save Mode
Use this drop-down list to switch the Toner Save Mode on and
off. When the Toner Save Mode is switched on, the printer
consumes less toner but print quality is reduced.
L
Skylark Rev.c
A5 size
Chapter 3
5-15-96
DR, pass 2
3-14
Making Printer Driver Settings
Summary of Contents for EPL-N1200
