Epson EPL-N1200, Reference Manual, Page: 106 / 256

Auto Continue
Permits the printer to automatically recover from a Print
Overrun, Mem Overflow, or Paper Set error. The printer
continues printing within a few seconds after one of these
problems occurs.
When Auto Continue is off, you must press the button on the
control panel to resume printing. In most cases, leave Auto
Continue off so you can tell when an error occurs and make
the necessary corrections. You might want to set Auto
Continue on when printing long jobs or when you are away
from the printer for long periods.
Toner Save Mode
Turns the Toner Save mode on. When turned on, the printer
saves toner by substituting a gray shade for the black inside of
characters. The characters are outlined in full black on the right
and lower edges.
Note:
You can also make the Toner Save setting item directly from
OneTouch Mode 2.
Image Optimum
Reduces the amount of graphics data when the data reaches
the memory limit, allowing complex documents to be printed.
When this mode is on, graphics quality is reduced. The options
are
Off , On , and Auto . On and Auto are the same.
R
Skylark
Rev.c
Reference Guide
A5 size Chapter 5
’96/05/15 DR, pass 2
Remote Control Panel Utility 5-13