Epson EPL-N1200, Reference Manual

Page: 63 / 256

Adding fonts
Use the following procedure to install soft (downloadable)
fonts. You can also specify certain fonts as being permanent,
which means they are kept in printer memory until power is
switched off.
1. Open the Font Manager window.
2. Click Add Fonts .
Initially, the list in the Add Fonts window contains drive
names.
3. Select the drive that contains the fonts you want to add by
double-clicking on its drive name, or by highlighting the
drive name and then clicking
OK .
The list changes to show all of the directories contained on the
drive you selected, in addition to the drive names.
4. Choose the name of the directory that contains the fonts you
want to add and highlight its name in the list.
To open a directory, double-click on the directory name, or
highlight the directory name and then click
OK .
The directory name followed by [..] on the list indicates the
previous directory. By selecting [..] , you can backstep
through the directories.
5. After you highlight the name of the directory that contains
the fonts you want to add, click
OK
to return to the Font
Manager window.
The names of the fonts contained in the directory you selected
using the Add Fonts window are shown in the Available
Fonts list.
L
Skylark Rev.c
A5 size Chapter 3
5-15-96 DR, pass 2
3-20 Making Printer Driver Settings