Epson EPL-6100L, Reference Manual

Page: 167 / 190

Working with Fonts
167
B
B
B
B
B
B
B
B
B
B
B
B
❏
The height of the bar code is automatically adjusted to 15% or
more of its total length, in conformance to the Code128
standard. For this reason, it is important to keep at least one
space between the bar code and the surrounding text to
prevent overlapping.
❏
Some application software automatically deletes the spaces at
the end of lines or changes multiple spaces into tabs.
Bar codes containing spaces may not be correctly printed
from applications that automatically delete spaces from the
ends of lines or change multiple spaces into tabs.
❏
When printing two or more bar codes on one line, separate
the bar codes with a tab, or select a font other than a BarCode
Font and input the space. If a space is input while Code128 is
selected, the bar code will not be correct.
The following codes are inserted automatically and need not be
input by hand:
❏
Left/Right quiet zone
❏
Start/Stop character
❏
Check digit
❏
Change code set character
Character type All ASCII characters (95 in total)
Number of characters No limit
Font size 26 pt to 104 pt (up to 96 pt in Windows XP/
2000/NT 4.0). Recommended sizes are 26 pt,
52 pt, 78 pt and 104 pt.