Epson EPL-6100L Reference Manual Download Page 116

Page: 116 / 190

116

Cleaning and Transporting

Warning:
Be careful not to touch the fuser, which is marked

CAUTION

Hot Surface Avoid Contact

, or the surrounding areas. If

the printer has been in use, the fuser and the surrounding
areas may be very hot.

3. Remove the developer cartridge and the photoconductor unit

from the printer as described in “Replacing the Developer
Cartridge” on page 97 and “Replacing the Photoconductor
Unit” on page 105.

4. Gently wipe the rubber part of the paper roller with a

well-wrung cloth.

1. Transfer roller
2. Paper roller

Caution:
Do not touch the transfer roller to avoid the degradation of
the print quality.

Summary of Contents for EPL-6100L































































































































































































Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands

Epson EPL-6100L, Reference Manual

Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands