Epson EPL-6100L Reference Manual Download Page 24

Page: 24 / 190

Handling Paper

❏

Paper should be of high quality and be relatively smooth, with
a weight between 60 and 90 g/m² (16 to 24 lb).

❏

The printer is extremely sensitive to moisture. Be sure to store
your paper in a dry environment.

❏

The use of colored paper is acceptable, but coated paper
should be avoided.

❏

You may use paper with preprinted letterheads, provided
that the paper and ink are both laser-printer type.

Loading the MP tray

You can load up to 150 sheets of plain paper into the MP tray.

Follow these steps to load paper into the MP tray:

1. Open the MP tray by pulling on the indentation in the middle

of the cover, then lift the paper guide slightly to move it to
accommodate the paper you are loading.

Summary of Contents for EPL-6100L































































































































































































Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands

Epson EPL-6100L, Reference Manual

Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands