Epson EPL-6100L Reference Manual Download Page 21

Page: 21 / 190

Product Information

Toner Save mode

To reduce the amount of toner used in printing documents, you
can print rough drafts using the Toner Save mode.

Options and Consumable Products

To purchase options or consumable products, contact your dealer
or the customer support representative in your area.

Options

Face-up Tray (C12C813801)

The Face-up Tray is recommended for printing on media that
require a straight-through paper path, such as labels and
transparencies.

Consumable products

Developer Cartridge (S050087)

This cartridge includes the toner that is used to create the image
on paper. The service life of the cartridge is approximately 6,000
printed pages.

Developer Cartridge (S050095)

This cartridge includes the toner that is used to create the image
on paper. The printer comes with this cartridge already installed.
The service life of the cartridge is approximately 3,000 printed
pages.

Summary of Contents for EPL-6100L































































































































































































Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands

Epson EPL-6100L, Reference Manual

Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands