Troubleshooting
131
8
8
8
8
8
8
8
8
8
8
8
8
Operational Problems
The
Ready
light (green) does not turn on when you turn the
printer on
Cause
What to do
The printer may not be
connected to the electrical
outlet.
Turn off the printer and check the power
cable connections between the printer
and the electrical outlet; then turn the
printer back on.
If the electrical outlet is controlled by an
outside source such as a wall switch,
make sure the switch is turned on or
plug another electrical device into the
outlet to check whether the outlet is
operating properly.
The
Ready
light (green) is on but nothing prints
Cause What
to
do
Your computer may not be
properly connected to the
printer.
Perform the procedure described in
“Connecting the Printer” in the
Setup
Sheet
.
The interface cable may not be
plugged in securely.
Check both ends of the cable between
the printer and the computer. If you are
using the parallel interface, be sure to
secure the connector using the wire
retaining clips.
Summary of Contents for EPL-6100L
