Epson EPL-6100L Reference Manual Download Page 130

Page: 130 / 190

130

Troubleshooting

2. Gently pull out any sheets that have fed part way into the

printer.

3. Close the output tray, and open the printer cover. Be sure to

remove any pieces of paper that may have torn off or are
remaining in the printer.

If necessary, take out the developer cartridge and the
photoconductor unit and remove any paper left in the paper
feed path. Reinstall the unit and then the cartridge.

4. Tap the edges of the paper stack on a flat surface and carefully

reload it. (Do not reload curled or wrinkled sheets.)

5. Close the printer cover. The jammed page’s print data is

automatically reprinted.

Summary of Contents for EPL-6100L































































































































































































Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands

Epson EPL-6100L, Reference Manual

Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands