Epson EPL-6100L Reference Manual Download Page 74

Page: 74 / 190

Setting Up Your Printer on a Network

Select Windows being used for clients then click OK.

Note:

❏

You do not have to install the additional driver for Intel
Windows 2000 (or XP) only, because that driver is preinstalled.

❏

Do not select additional drivers other than Intel Windows 95
or 98 (and Me) and Intel Windows NT 4.0 or 2000. The other
additional drivers are not available.

5. When a prompt appears, insert the CD-ROM that comes with

your printer in your CD-ROM drive, then click

For Windows Me/98/95
clients

Select

Intel Windows 95 or

98 (and Me)

For Windows NT 4.0 clients

Select

Intel Windows NT 4.0

or 2000

For Windows XP/2000
clients

Intel Windows XP (or 2000)

may been already selected.

Summary of Contents for EPL-6100L































































































































































































Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands

Epson EPL-6100L, Reference Manual

Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands