Epson EPL-6100L Reference Manual Download Page 114

Page: 114 / 190

114

Cleaning and Transporting

2. Open the printer cover by pressing the latch on the left side

of the printer and lifting the cover up all the way.

Warning:
Opening the printer exposes the fuser, which is marked

CAUTION Hot Surface Avoid Contact

. Be careful not to

touch the fuser. If the printer has been in use, the fuser may
be very hot.

3. Remove the developer cartridge and the photoconductor unit

as described in “Replacing the Developer Cartridge” on page
97 and “Replacing the Photoconductor Unit” on page 105.

4. Remove any dirt inside the printer with a clean, dry, lint-free

cloth. Do not use compressed air. If you have paper feed
problems, clean the paper roller by wiping the roller with a
clean, dry, lint-free cloth.

5. Reinstall the photoconductor unit, and then the developer

cartridge.

6. Lower the printer cover. Press it gently until it clicks shut.

Summary of Contents for EPL-6100L































































































































































































Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands

Epson EPL-6100L, Reference Manual

Search results

Summary of Contents for EPL-6100L

Reviews:

Related manuals for EPL-6100L

Brands by name

Popular brands