manualshive.com logo in svg

Epson EPL-6100L, Reference Manual, Page: 168 / 190

Share
Download
Epson EPL-6100L Reference Manual Download Page 168

168

Working with Fonts

Print Sample

EPSON ITF

❏

The EPSON ITF fonts conform to the USS Interleaved 2-of-5 
standard (American).

❏

Four EPSON ITF fonts are available, allowing you to enable 
and disable the automatic insertion of check digits and 
OCR-B.

❏

The height of the bar code is automatically adjusted to 15% or 
more of its total length, in conformance to the Interleaved 
2-of-5 standard. For this reason, it is important to keep at least 
one space between the bar code and the surrounding text to 
prevent overlapping.

❏

Interleaved 2 of 5 treats every two characters as one set. When 
there are an odd number of characters, EPSON ITF fonts 
automatically add a zero to the beginning of the character 
string.

EPSON Code128

Character type

Numbers (0 to 9)

Number of characters

No limit

Summary of Contents for EPL-6100L































































































































































































Reviews:

No comments