Note:
❏
To stop the transmission, press the
Stop/Reset
key. A message appears, requesting confirmation
to cancel the setting. Select
YES
, and then press the
Select
key.
❏
If
FAX TX
in
ADMIN. MANAGEMENT
/
PASSWORD SETTING
/
FULL FUNC. NO.
has been
restricted, type in the number specified for
FULL FUNC. NO.
after pressing the
Start
key.
Sending a Fax Manually Using the On hook Key
1. Load the document into the ADF.
Note:
❏
When sending a fax manually, load the document into the ADF. An error will occur if the
document is placed on the original glass.
❏
For details on loading the document into the ADF, refer to “Sending a Fax Using the ADF” on
page 22.
2. If desired, select the image quality.
Note:
For details, refer to “Selecting the Image Quality” on page 26.
3. Press the
On hook
key.
4. Specify the fax number of the recipient.
Note:
❏
The keys for registered destinations can be used even if the
On hook
key has been pressed. For
details, refer to “Specifying a Recipient” on page 27. (Group dial destinations cannot be
specified.)
❏
If Pulse is selected as the telephone line type, press the key to temporarily change the line type to
Tone.
5. Press the
Start
key to begin scanning and sending the fax.
Note:
❏
To stop the transmission, press the
Stop/Reset
key. A message appears, requesting confirmation
to cancel the setting. Select
YES
, and then press the
Select
key.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Sending Faxes
40
