RX PRINT
Settings
MEMORY RX
/ PRINT RX
Select whether the fax is printed only after all document pages have been
received or printing begins as soon as the first page of the document is
received.
❏
MEMORY RX
: Printing begins after all pages have been received.
❏
PRINT RX
: Printing begins after the first page has been received.
RX MODE
Settings
AUTO RX
/ MANUAL RX
Select whether the reception mode is set to automatic reception or manual
reception.
❏
AUTO RX
: Automatically begins receiving the fax after the set number
of rings.
❏
MANUAL RX
: Does not automatically receive the fax. Reception begins
after making a connection by picking up the telephone receiver or
pressing the
On hook
key, then pressing the
Start
key.
For details on manual reception, refer to “Receiving Faxes Manually” on
page 48.
FORWARD
Settings
OFF
/ ON / ON (PRINT)
Select whether or not to forward received fax documents.
❏
OFF
: Select this setting to not forward the document.
❏
ON
: Select this setting to forward the received fax document to the
specified fax number or e-mail address.
❏
ON (PRINT)
: Select this setting to forward the received fax document
to the specified fax number or e-mail address at the same time that the
machine prints it.
For details on specifying settings, refer to “Specifying Forwarding Settings”
on page 21.
FOOTER
Settings
OFF
/ ON
Select whether or not the reception information (date received, number of
pages, etc.) is printed at the bottom of each received document.
SELECT TRAY
Settings
TRAY1: DISABLE /
ENABLE
TRAY2: DISABLE /
ENABLE
TRAY3: DISABLE /
ENABLE
Select which paper tray can be used to supply paper when printing re-
ceived documents or transmission reports. A paper tray that cannot be
used for supplying paper can also be specified.
Note:
If an optional 500-Sheet Paper Cassette Unit is not installed,
TRAY3
does not
appear.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Control Panel and Configuration Menu
17
