Epson AcuLaser CX37DNF Guide User Manual Download Page 25

Page: 25 / 86

4. Place the original document face down on the original glass and align the document on the scales

above and to the left of the original glass.

5. Gently close the ADF cover.

Note:

Closing it too quickly may cause the document to move on the original glass.

6. Select the document image quality.

Note:

For details on selecting the document image quality, refer to “Selecting the Image Quality” on
page 26.

7. Specify the fax number of the recipient in one of the following ways:

❏

Direct dialing

❏

Using the favorite list

❏

Using the Speed Dial function

❏

Using the Group Dial function

❏

Using the Address Book functions

❏

Using the

Redial/Pause

key

Note:

❏

For details on specifying the recipient, refer to “Specifying a Recipient” on page 27. For details
on using the

Redial/Pause

key, refer to “Using the Redial Function” on page 32.

❏

A transmission can also be sent to multiple recipients with the Broadcast function. For details on
sending a broadcast transmission, refer to “Sending a Fax to Multiple Recipients (Broadcast
Transmission)” on page 32.

8. Press the

Start

key.

A screen appears, requesting confirmation of the scanning area.

9. To scan the displayed scanning area, press the

Select

key. The document is scanned.

Note:

To change the displayed scanning area, press the

key, select the desired scanning area. Press

the

Select

key again to start scanning.

Epson AcuLaser CX37DNF Facsimile User’s Guide

Sending Faxes

Summary of Contents for AcuLaser CX37DNF Guide























































































Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands

Epson AcuLaser CX37DNF Guide, User Manual

Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands