Epson AcuLaser CX37DNF Guide User Manual Download Page 26 | Manualshive

Page: 26 / 86

background image

10. To scan multiple pages from the original glass, check that the message

NEXT PAGE?

appears,

replace the document, and then press the

Select

key. When scanning of the document is finished,

press the

Start

key.

The document is scanned, and then the fax is sent.

Note:

❏

To stop the transmission, press the

Stop/Reset

key. A message appears, requesting confirmation

to cancel the setting. Select

YES

, and then press the

Select

key.

❏

If

FAX TX

in

ADMIN. MANAGEMENT

/

PASSWORD SETTING

/

FULL FUNC. NO.

has been

restricted, type in the number specified for

FULL FUNC. NO.

after pressing the

Start

key.

❏

If the fax could not be sent (for example, because the line was busy), the automatic redial function
will try sending the transmission again.
If the fax could not be sent with the automatic redial function, a TX Result Report can be printed.
For details, refer to “TX RESULT REPORT” on page 69.

❏

If you want to cancel a scanned document queued for transmission or a fax waiting to be
redialed, select

CANCEL RESERV.

from the menu. For details, refer to “Canceling a Queued

Transmission” on page 42.

❏

If memory is nearly full, scanning of the document is stopped and a message appears, allowing
you to select whether to start the transmission or cancel that transmission job. If the selection is
made to cancel the job, the pages of the document that have been scanned for that job are deleted.
If the selection is made to begin the transmission, transmission begins. After the scanned pages
have been sent, scanning of the document starts again.

Selecting the Image Quality

The image quality of a document can be selected before it is sent as a fax.

Selecting the Resolution

1. Press the

u

or

d

key to select the current fax image quality, and then press the

Select

key.

Note:

STD/TEXT

,

FINE/TEXT

,

S-FINE/TEXT

,

STD/PHOTO

,

FINE/PHOTO

or

S-FINE/PHOTO

may

appear, depending on the setting selected for

FAX TX OPERATION

in the

UTILITY

menu.

2. Check that

QUALITY(ORIGINAL)

is selected, and then press the

Select

key.

Epson AcuLaser CX37DNF Facsimile User’s Guide

Sending Faxes

26

«
...
24
25
26
27
28
...
»

Summary of Contents for AcuLaser CX37DNF Guide























































































Reviews:

No comments

Related manuals for AcuLaser CX37DNF Guide

Brand: Panasonic Pages: 2

Brand: Pacific Pages: 8

Brand: NSS Pages: 12

ST1000E with TRS

Brand: Sure Sweep Pages: 36

Perfect Binder G10 120

Brand: Riso Pages: 78

Brand: Bartell Global Pages: 16

Brand: PHC Pages: 4

Brand: Singer Pages: 46

Brand: CIMLINE Pages: 60

Brand: JUKI Pages: 4

Brand: Kval Pages: 80

Brand: Brother Pages: 262

Brand: Hitachi Pages: 32

Brand: Hitachi Pages: 48

Brand: Hitachi Pages: 148

Brand: Hitachi Pages: 220

Brand: Hitachi Pages: 16

DDL-5600N Series

Brand: JUKI Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands