Epson AcuLaser CX37DNF Guide User Manual Download Page 29

Page: 29 / 86

Using the Favorite List

If frequently specified speed dial destinations and group dial destinations are registered in the favorite
list, press the

Addressbook

key, and then press the

key to quickly select the desired

destination.

Note:

The destination must have been previously registered on the favorite list. For details, refer to “TX
RESULT REPORT” on page 69.

1. Press the

Addressbook

key.

Note:

The

Addressbook

key can be used if the main screen or

Can Use AddressBook

is displayed.

2. Press the

key to select the desired destination, and then press the

Select

key.

Note:

If a destination was incorrectly selected, press the

Back

key, press the

Addressbook

key, and then

select the correct destination.

3. Press the

Select

key again.

4. Press the

key to select

FINISH

, and then press the

Select

key.

The destination is specified.

Note:

❏

If a group dial destination was selected, multiple destinations are specified.

❏

To erase the selected destinations, press the

Stop/Reset

key.

Using the Speed Dial Function

If a recipient has been registered with a speed dial number, the recipient’s fax number can be dialed
simply by pressing a speed dial number key.

Note:

The recipient must have been registered with a speed dial in advance. For details, refer to “Registering a
Speed Dial Destination” on page 61.

Epson AcuLaser CX37DNF Facsimile User’s Guide

Sending Faxes

Summary of Contents for AcuLaser CX37DNF Guide























































































Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands

Epson AcuLaser CX37DNF Guide, User Manual

Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands