Epson AcuLaser CX37DNF Guide User Manual Download Page 36

Page: 36 / 86

5. Specify the fax number of the recipient.

Note:

❏

Refer to “Specifying a Recipient” on page 27.

❏

To send a broadcast transmission to multiple destinations, refer to “Sending a Fax to Multiple
Recipients (Broadcast Transmission)” on page 32. After all recipients have been specified, press
the

Start

key to begin scanning. After scanning is finished, the machine with enter a standby

state.

❏

If the specified speed dial number is registered with batch transmission settings, the fax will be
sent at the time specified for the batch transmission.

6. Press the

Start

key to begin scanning, and then the machine enters transmission standby mode.

appears in the screen when the machine is in standby mode.

Note:

If you want to cancel a timer transmission, select

CANCEL RESERV.

. For details, refer to “Canceling

a Queued Transmission” on page 42.

Sending a Batch Transmission

Multiple documents can be scanned and stored in the memory of this machine to be sent together to a
single destination at a specified time.

Note:

From the

UTILITY

menu, batch transmission settings (transmission time) must have been registered

with a speed dial number in advance. For details, refer to “Using the Speed Dial Function” on
page 29.

1. Position the document to be faxed.

2. If desired, select the image quality.

Note:

For details, refer to “Selecting the Image Quality” on page 26.

3. Select destinations for the batch transmission from the favorite list, or specify their speed dial

number.

Epson AcuLaser CX37DNF Facsimile User’s Guide

Sending Faxes

Summary of Contents for AcuLaser CX37DNF Guide























































































Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands

Epson AcuLaser CX37DNF Guide, User Manual

Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands