Epson AcuLaser CX37DNF Guide User Manual Download Page 65

Page: 65 / 86

❏

If the destination is already registered with the specified group dial number,

REGISTERED!

appears. Press the

Back

key to return to the

DIAL REGISTER

screen, and then continue with step

5. Enter the name of the group dial destination to be registered, and then press the

Select

key.

Note:

❏

Text up to 20 characters long can be entered for the name.

❏

For details on entering/editing text and the characters that can be entered, refer to “Entering
Text” on page 78.

6. Use the keypad to type in the speed dial number to be registered with the group dial destination,

and then press the

Select

key.

Note:

❏

To program a group dial number registered with a group dial destination, press the

Addressbook

key, type in the group dial number and then press the

Select

key.

❏

For details on entering/editing text and the characters that can be entered, refer to “Entering
Text” on page 78.

7. Press the

Select

key again.

8. Check that

ADD

is selected, and then press the

Select

key. Repeat steps 6 through 8 until all desired

destinations are specified.

❏

If no more recipients are to be specified, continue with step 9.

9. Select

FINISH

, and then press the

Select

key.

The destinations are registered as the group dial destination.

Note:

To return to the Fax mode screen, press the

Back

key until the Fax mode screen appears, or press the

Stop/Reset

key.

Changing/Deleting Group Dial Information

The registered group dial information can be changed.

1. Press the

key to select

UTILITY

, and then press the

Select

key.

Epson AcuLaser CX37DNF Facsimile User’s Guide

Registering Recipients

Summary of Contents for AcuLaser CX37DNF Guide























































































Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands

Epson AcuLaser CX37DNF Guide, User Manual

Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands