Note:
If a destination was incorrectly selected, press the
Back
key, and then perform the operation again
from step 1.
4. When
OK=Select
appears, press the
Select
key again.
5. Press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
Note:
To erase the selected destinations, press the
Stop/Reset
key.
Using the Search Function of the Address Book
If a recipient is registered with a speed dial number or a group dial number, the recipient can be found
by using the List or Search function of the address book.
Follow the procedure described below to search using the Search function of the address book.
1. Press the
Addressbook
key 4 times.
Note:
The
Addressbook
key can be used if the main screen or
Can Use AddressBook
is displayed.
2. Press the
u
or
d
key to select
SEARCH
, and then press the
Select
key.
A screen appears, allowing you to enter the text to be searched for.
3. Using the keypad, enter the first few characters of the name programmed for the desired recipient.
Note:
❏
Enter the name programmed in the speed dial number or the group dial number. For details on
entering text, refer to “Entering Text” on page 78.
❏
Text up to 10 characters long can be entered.
4. Press the
Select
key.
The number of names beginning with the text entered in step 3 is displayed.
Note:
If no names beginning with the entered text are found,
NOT FOUND
is displayed.
5. Press the
u
or
d
key to select the desired destination, and then press the
Select
key.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Sending Faxes
31
