5. Press the
Start
key.
The document is scanned, and then the fax is sent.
Note:
❏
To stop the transmission, press the
Stop/Reset
key. A message appears, requesting confirmation
to cancel the setting. Select
YES
, and then press the
Select
key. If this is done, all selected
recipients are cleared.
❏
If
FAX TX
in
ADMIN. MANAGEMENT
/
PASSWORD SETTING
/
FULL FUNC. NO.
has been
restricted, type in the number specified for
FULL FUNC. NO.
after pressing the
Start
key.
Sending a Fax at a Specified Time (Timer Transmission)
A document can be scanned and stored in memory to be sent at a specified time. This feature is
convenient for sending faxes at discounted calling times.
Note:
❏
When sending multiple documents together to a single destination at a specified time, batch
transmission is useful since only a single connection is required.
❏
If the machine is not programmed with the current time, the fax cannot be sent at the specified time.
For details on specifying the time, refer to the Printer/Copier/Scanner User’s Guide.
❏
Timer transmission can be combined with broadcast transmission.
1. Position the document to be faxed.
2. If desired, select the image quality.
Note:
For details, refer to “Selecting the Image Quality” on page 26.
3. Press the
u
or
d
key to select
TIMER TX
, and then press the
Select
key.
The
TIMER TX SETTING
screen appears.
4. Using the keypad, enter the desired transmission time, and then press the
Select
key.
Note:
❏
The time is set in the 24-hour format.
❏
If you want to correct the time, press the
Back
key, and then enter the correct time.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Sending Faxes
35
