Note:
If the desired recipient name does not appear in the search results, press the
Back
key to return to the
screen allowing you to enter the text to be searched for, and then try searching for different text.
6. When
OK=Select
appears, press the
Select
key again.
7. Press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
Note:
To erase the selected destinations, press the
Stop/Reset
key.
Using the Redial Function
To send a fax to the last number dialed, press the
Redial/Pause
key to recall the fax number.
1. Press the
Redial/Pause
key. Check that the desired fax number appears in the message window.
Specifying Multiple Recipients
A fax can be sent to multiple recipients in a single transmission. There are two methods for sending a
fax to multiple recipients in a single transmission.
❏
Using group dial function
❏
Using Broadcast function
Sending a Fax to Multiple Recipients (Broadcast Transmission)
Directly type in multiple destinations, or select from the favorite list, speed dial destinations or address
book.
Note:
❏
A maximum of 236 destinations can be specified at one time.
❏
With the transmission result report, you can check whether the fax was sent to all recipients. For
details on the transmission result report, refer to “Checking the Transmission/Reception Result From
the Message Window” on page 68 and “About the Reports and Lists” on page 68.
1. Position the document to be faxed.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Sending Faxes
32
