1. Press the
Addressbook
key 2 times.
Note:
The
Addressbook
key can be used if the main screen or
Can Use AddressBook
is displayed.
2. Use the keypad to type in the speed dial number (1-220), and then press the
Select
key.
Note:
❏
If a number was incorrectly entered, press the
Back
key, and then type in the correct number of
the speed dial destination.
❏
If the entered speed dial number is not registered with a fax number, the message
NOT FAX NO.
appears. In addition, if the entered speed dial number is not registered with a recipient, the
message
NOT REGISTERED!
appears. Enter a speed dial number registered with a fax number.
3. When
OK=Select
appears, press the
Select
key again.
4. Press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
The destination is specified.
Note:
To erase the selected destinations, press the
Stop/Reset
key.
Using the List Function of the Address Book
If a recipient is registered with a speed dial number or a group dial number, the recipient can be found
by using the List or Search function of the address book.
Follow the procedure described below to search using the List function of the address book.
1. Press the
Addressbook
key 4 times.
Note:
The
Addressbook
key can be used if the main screen or
Can Use AddressBook
is displayed.
2. Check that
LIST
is selected, and then press the
Select
key.
The list of programmed speed dial numbers and group dial numbers is displayed.
3. Press the
u
or
d
key to select the desired destination, and then press the
Select
key.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Sending Faxes
30
