Epson AcuLaser CX37DNF Guide User Manual Download Page 22

Page: 22 / 86

Chapter 3

Sending Faxes

Basic Fax Operation

This section contains basic information of fax transmission.

Note:

Documents with the following paper sizes can be faxed.
Original size: A5/A4/Statement/Letter (when using the original glass)
Width: 140 to 216 mm
Length: 148 to 500 mm (when using the ADF)

Sending a Fax Using the ADF

If the ADF is used, original documents containing multiple pages can be automatically scanned.

Note:

❏

Do not load original documents that are bound together, for example, with paper clips or staples.

❏

Do not load more than 35 sheets; otherwise an original document misfeed or damage to the
document or machine may occur.

❏

If the original document is not loaded correctly, it may not be fed in straight, or an original document
misfeed or damage to the document may occur.

❏

Do not open the ADF cover while documents loaded into the ADF are being scanned.

1. Press the

Fax

key to enter Fax mode.

Note:

If the initial mode (

UTILITY

MACHINE SETTING

INITIAL MODE

) is set to

FAX

, this step can be

skipped.

2. Make sure that there is no document on the original glass.

Epson AcuLaser CX37DNF Facsimile User’s Guide

Sending Faxes

Summary of Contents for AcuLaser CX37DNF Guide























































































Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands

Epson AcuLaser CX37DNF Guide, User Manual

Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands