Envipco FLEX Dual, Service Manual

Page: 64 / 114

4-6
4.4. Diagnostic Program
The Diagnostic Program allows you
section correspond with the tabs in the
•
• •
•
Processes
• • • •
Misc
• • • •
Main
•
• •
•
Ultra-48
• • • •
RS-485
• • • •
Config
4.4.1. Processes Tab
The Processes tab, shown in Figure 4
column provides options for a different
options for each. The Save Config button
FIGURE 4-7.
Diagnostics - Processes
1.
Hardware Process - Controls
which are conveyed through
RS
-
485 port on the
PC
board.
errors.
Chapter 4 RVM
Program
you to test components and configure the
RVM
.
The topics
the Diagnostic Program:
4 -7, gives an overview of
FLEX
’s software processes.
different process. It displays the version of each process and
button is not used in the field.
Processes Tab
Controls the internal data communications of the
RVM
through an
RS
-485 serial bus. The
RS
RS RS
RS
485-Port button resets the
board. Its purpose is to diagnose internal communications
Process Version
Software
topics in this
Each
and some
RVM
,
the
tions