Envipco FLEX Dual, Service Manual

Page: 63 / 114

Service Mode
4.
RVM Software . This option
5.
Start Diagnostic . This
described in Section 4.4
6.
Edit Parameters . This
4.3.3. Exiting Service Mode
To exit Service Mode with default log in, go totheMisctab andpressRestart
Mode, go to the Technician Interface
button to exit Service Mode, as shown
Mode, Service Mode times out five minutes
the display indicates that Service Mode
FIGURE 4-5.
Exiting Service Mode
FIGURE 4-6.
Service Mode Time
option is not yet implemented.
option starts the Diagnostic Program, which is
on page 4-6.
option is not yet implemented.
Mode
To exitServiceModewithdefaultlogin, go to the Misc tab and press Restart
RVM
Software. To exit
Interface screen, and tap Release Jump Drive . You will then see
shown in Figure 4-5. If you do not tap the option to exit Service
minutes after removing the Jump Drive. In this case, an
Mode will time out. This screen is shown in Figure 4- 6.
Time Out Screen
Exit Service Mode
Service Mode Timer
4-5
exit Service
see a
Service
an icon on
6.
Exit Service Mode
Service Mode Timer