Envipco FLEX Dual, Service Manual

Page: 76 / 114

4-18
Chapter 4 RVM Software
TABLE 4-1.
MC1 Sensors
Sensor Description
SAFETY_LOOP_BROKEN Set when any cabinet door is open (#1-#4).
CAN_FLATENER1_POS_B Not used.
CAN_FLATENER2_POS_B Not used.
CAN_FLATENER2_POS_A Not used.
CAN_FLATENER1_POS_A Not used.
BAIL_OCCUPIED Not used.
BUTTON3 Not used.
BUTTON2 Not used.
BUTTON1 Not used.
BIN_A_FULL Main cabinet bin full status.
BIN_B_FULL Main cabinet second bin full status.
_RESERVE_S2 Reserved.
RESET_BIN Main cabinet bin reset button status.
ANALOG_INPUT_1 Optional analog input. Not currently in use.
COMPACTOR1_BLOCKED Compactor 1 stall status (as inferred by MC1).
COMPACTOR1_PADDLE Compactor 1 paddle block (as inferred by MC1).
COMPACTOR1_TIMEOUT Not used.
COMPACTOR2_BLOCKED Compactor 2 stall status (as inferred by MC1).
COMPACTOR2_PADDLE Compactor 2 paddle block (as inferred by MC1).
COMPACTOR2_TIMEOUT Not used.
4.5.1.2. MC5 Sensors
Table 4-2 is a full list of the
MC
5 Sensors.
TABLE 4-2.
MC5 Sensors
Sensor Description
BUTTON1 Payment button status.
POWER_24V_OK Status of 24V power.
POWER_AC_OK Status of AC power.
BATTERY_LOW Status of backup battery.
SENSOR_ENTRY_1 Status of first material sensor.