Envipco FLEX Dual, Service Manual

Page: 46 / 114

RVM Controller Box
3-15
•
• •
•
Scanner
MUX
-
data connection for the Scanner
MUX
• • • •
Sensor Scanner Array - power to the scanners, display, and the In-Feed sensors
• • • •
Rear Conveyor – The Rear Conveyor is not used on the
flex
this connector is for the
“AL” (Aluminum) sensor input.
• • • •
In-Feed - power to the In-Feed rollers and conveyor
•
• •
• VGA
-
VGA
graphics connector for the display
• • • • USB
Ports - The display is connected to either of these ports, and you can
connect a keyboard to the other.
• • • •
LASER Control – Laser Power Connector
FIGURE 3-15.
RVM Controller Box Connectors
VGA
Scanner MUX
208-240V AC Power In
USB Ports
Laser Control
In-Feed
Sensor Scanner Array
RS-232 Printer Port Signal
USB Ports
RJ-45 LAN
HARD DRIVE ACCESS PANEL
REAR CONVEYOR
3-18