Enterasys X-Pedition XSR, Cli Reference Manual

Page: 594 / 684

DHCP Commands
15-84 Configuring DHCP
Syntax of the “no” Form
Use the no form of this command to delete the boot image name:
no bootfile
Mode
Any of the following command modes are available:
DHCP pool configuration:
XSR(config-dhcp-pool)#
DHCP host configuration:
XSR(config-dhcp-host)#
DHCP client class configuration:
XSR(config-dhcp-class)#
Example
The following example specifies roboboot as the name of the boot file:
XSR(config-dhcp-pool)#bootfile roboboot
client-class
This command specifies the name of a DHCP client class. The XSR aggregates DHCP clients which
will share the same configured attributes. Adding a client class to different DHCP pools in not
permitted. For example, you cannot add client class marketing to both pool1 and pool2 .
Syntax
client-class name
Syntax of the “no” Form
Use the no form of this command to remove the client class:
no client-class name
Mode
Either of the following command modes are available:
DHCP pool configuration:
XSR(config-dhcp-pool)#
DHCP host configuration:
XSR(config-dhcp-host)#
When specified from DHCP pool configuration mode, the CLI acquires DHCP class configuration
sub ‐ mode:
XSR(config-dhcp-class)#
When specified from DHCP host configuration mode, the CLI does not acquire a new sub ‐ mode.
Note: Adding a client class to different DHCP pools in not permitted. For example, you cannot add
client class marketing to both pool1 and pool2 .
name
Designation of the client class using standard ASCII characters.