Enterasys X-Pedition XSR, Cli Reference Manual

Page: 211 / 684

RIP Commands
XSR CLI Reference Guide 5-135
Example
XSR(config)#router rip
XSR(config-router)#
timers
This command configures RIP timers.
Syntax
timers basic [ update | invalid | flush ]
Syntax of the “no” Form
The no form of this command resets the timers to the default value:
no timers basic
Mode
Router configuration: XSR(config-router)#
Defaults
• Update: 30 seconds
• Invalid: 180 seconds
• Flush: 300 seconds
Example
The following example sets values for the RIP timers:
XSR(config-router)#timers basic 10 30 60
update
Interval the RIP timer is revised, ranging from 1 to 2,147,483,647 seconds.
invalid
Interval the RIP timer is deemed invalid, ranging from 1 to 2,147,483,647 seconds.
The invalid interval must be at least three times the update interval.
flush
Interval the RIP timer is flushed, ranging from 1 to 2,147,483,647 seconds. The flush
interval must be larger than the invalid interval.